Installing Your Own Kitchen Floor

There are many different types of flooring from which to choose when taking on a kitchen remodeling project. Vinyl is among the most common, and is also by far the most affordable. Below are some tips that might help you when taking on this project yourself.

Installing Your Own Kitchen Floor Many people often dread the prospect of replacing a kitchen floor. Whether you are considering hiring someone to do the job, or choose to try doing it yourself, it can be a stressful occasion.

Though tile is commonly used, and is still very popular in many houses today, there are other options available that will save you time and money. Vinyl flooring is one such option.

Vinyl flooring is a great choice for several rooms in the home, including, of course, the kitchen. The kitchen is also one of the most common places to install a vinyl floor. All it takes is the right preparation, the right tools, and patience.

It is, by far, one of the most affordable flooring options available, and, if you choose to do it yourself, it becomes even more so. This article outlines the tools needed to install a vinyl floor, as well as what you need to know to get started.

Before you begin installing your new floor, gather the tools you will need for this project. They include: masking tape, a pry bar, vinyl flooring adhesive, a seam kit, a hammer, a notched trowel, a rolling pin, a 1" wide ruler, craft paper and a pencil, scissors and a utility knife, and of course, the new flooring.

Empty Kitchen To begin installation, remove mobile items from the kitchen. This includes those that can be unscrewed and uninstalled, then later replaced, such as tables and chairs. Remove any mouldings along the wall and thoroughly clean the entire surface where the floor will be laid. If the floor is not level, you might wish to use plywood sub-flooring to level it out.

Now you are ready to begin actually laying the floor. First, make the pattern you will follow to lay the flooring. Use craft paper and masking tape to design the pattern you want by laying it out on the surface the flooring will occupy. This will give you a more realistic idea of what the pattern will look like when down.

Now lay the floor out and begin to cut it to match the flooring. Add an extra inch to the cut dimensions to account for the space between the flooring and the wall.

Once you are happy with your results, remove the cut flooring and apply the adhesive to the underside. Then press the flooring into place. If necessary, roll out any edges so they don't stick up. Make sure all edges are flat against the sub-floor or surface on which they are laid. You have now laid your own vinyl floor.